0 item(s) in cart
Show cart/pay
Open

Demo of Ontech Control

Click here to test the control panel.

Applications

In your house or cottage
In the boat
Remote control air pump heater and air conditioner
Alarm, control and monitor
Industrial use

Products

Ontech GSM 9040
Ontech GSM 9025
Ontech Control

Accessories

Ontech Relay 9015
Ontech IR 9016
Ontech alarm box 9012
Ontech PIR 9011
Temp.sensor 2 meter
Backup battery
Troubleshooting & FAQ
Start
How it works
How it works
In your house or cottage
In the boat
Remote control air pump heater and air conditioner
Alarm, control and monitor
Industrial use
Ontech GSM 9040
Ontech GSM 9025
Ontech Control
Ontech Relay 9015
Ontech IR 9016
Ontech alarm box 9012
Ontech PIR 9011
Temp.sensor 2 meter
Backup battery
Support

Ontech PIR 9011

Ontech PIR 9011 is a motion detector

Functions
Specifications
Documents
Firmware

Heating

    • Connect a radiator (electric radiator or heater fan) to the Ontech GSM 9040 to control the heat in the room.
    • Connect up to seven wireless Ontech Relay 9015 extra relays s and control the heat individually in many room via controllable 230V outputs.
    • Use the thermostat function to automatically keep the heat at a certain level in the rooms or the entire cabin. Connect the Ontech GSM 9040 to control a contactor in the power supply and control the heat throughout the cabin.
    • With the Ontech IR 9016 accessory, move the air heat pump remote control to your phone / tablet / computer.

 

Other applications

  • The 230V output can connect any type of electrical control up to 230V / 16A. This may be servers, routers, pumps, ventilation, motors etc.
  • A special feature for using the device to open ports by command or simple dial from telephone available. This causes the remote control to open the garage door becomes redundant. It has moved into the mobile phone.
  • The 230V output can be set with timer function so it turns on or off after the set time..

Alarms

    • Connect different types of alarms to the two alarm inputs of the Ontech GSM 9040. The alarm inputs can be set to alert when the circuit  closes or opens.
    • All alarms with relay output can be connected, such as motion detectors (PIR), fire alarms, magnetic switches, level guards, pedal mats etc.
    • Alarm transmitters which close or opens  voltage 3-30V in case of alarm can also be connected
    • Connect the Ontech Relay 9015 Wireless Ontech Relay 9015 and Ontech Alarmbox 9012 to the alarm transmitter and send the signal wirelessly to the Ontech GSM 9040. There is no need for long cabling.
    • The alarm inputs can be set with delay.

 

Temperature

  • Ontech GSM 9040 reports the current temperature. The Ontech Control control panel automatically updates  so you can see the current temperature at all times.
  • An external temperature sensor with 2 meter cable  can be connected and then the temperature is reported for both the internal temperature sensor and the external.
  • Temperature alarm can be set as alarm when the temperature is below and / or exceeds the alarm limits set by the users.

 

Operating the device

  • The device is controlled with the Ontech Control web panel. This is by far the easiest and easiest way to control and communicate with Ontech GSM 9040. More information here. SIM card for this is included and the first month free of charge.
      • The device can also be controlled by SMS or with an app that uses SMS. A SIM card is required. All GSM operators work but not clean 3G providers such as the operator Tre, Hallon.se or Wifog. With apps for Android and Iphone, the use can be simplified by SMS control.

Main power monitoring

  • Ontech GSM 9025 has built-in backup battery that is enough to keep the device alive 10-20 hours. Useful when the device is used as an power fail alarm.
  • The device alerts to all names in the alarm list when a power failure occurs and announces when power is returned.

More

    • There is a setting that allows the 230V output to turn on or off at alarm.
    • It is possible to measure current 4-20 mA or voltage 0-10 V and get the values reported.
    • You can also set alarms when limit values are exceeded or lowered. The device alerts via email. Optionally, SMS can be requested for alarm.

Specifications

GSM Dual Band 900/1800 MHz, antenna contact type:SMA
SIM card Mini-SIM. Comaptible with all operators with GSM (2G) networks
Temperature range – 40 to + 55 degrees Celsius. The backup battery charges between +5 and +35 degrees C and can power the device between -5 and +40 degrees C.
Power consumtion Nominal <0,5W, maximum 4 W.
Voltage Is powered with 12-24 VDC. Power adapter is included
Backup battery Built in backup battery 4,2 V Litium Polymer, 1100 mAh
Relay output Potential free, max230V/10A
Alarm inputs (digital inputs) 2 inputs 3-30 VDC can be set to Normally Open or Normally Closed
Internal temperature sensor +/- 2 degrees at 25 degrees C and 230V output not activated
Input for  external temperature sensor Extern Tempsensor can be connected
Mini-USB contact (on circuit board) For updating the firmware. Cable is included.
Short range radio  2,4 GHz. Output power 1 mW
Cabinet Cabinet sealing according to IP65
Weight 250 gr
Size  140*75*40 mm
Approvals Fullfills all EU requirements and is CE marked.

 

Firmware

Download the latest firmware here.

Temperature sensor

External temperature sensor that fits the models Ontech GSM 9025/9035/9040 and Ontech Relay 9015.

Functions
    • External temperature sensor with 2 meter cable.
    • 2.5 mm plug that fits the models Ontech GSM 9035 Ontech GSM 9040 and Ontech Relay 9015.

 

  • When connected to Ontech GSM 9025, remove the plug and connect the cables to the screw terminal. Accuracy +/- 1 degree C.
  • The cable can be extended up to 10 meters.

Extra Relay 9015

Ontech Relay 9015 is a wireless accessory for the Ontech GSM 9025 or Ontech GSM 9040 main units. For indoor use. The Ontech Relay 9015 is an additional relay with two alarm inputs and temperature elements. The device can be used for remote control of a 230 V outlet, as alarm unit and for temperature alarm and thermostat.

Functions
Specifications
Documents
  • The device communicates with the main unit with a short-range radio frequency of 2.4 GHz. Up to 7 Ontech GSM Relay can be connected and controlled individually to each main unit.
  • The unit has a 230V outlet that can be switched on and off by any of the main devices such as elements, pumps, etc.. The power supply can be delayed, from 1 second to 99 hours.
  • The unit has a built-in temperature sensor. An external temperature sensor can be connected. This is an optional accessory and is not included. Upon request, the unit reports the temperature.
  • The unit can be set to alert if the temperature exceeds or falls below a preset temperature.
  • The unit can be used as a thermostat if one element is connected to the 230 V socket.
  • The device has two wired alarm inputs. These can be set to end up (Normally Open, NO) or Breaking Function (Normally Closed, NC). Various types of alarms can be connected to these, such as fire alarms, motion detectors, level detectors, etc.
  • Easy to install. Put the device into a wall outlet and it automatically contacts the main unit and registers in the Ontech system.
  • The range is approximately 30 meters in the free field. This is usually enough for a normal sized villa. The devices also function as “repeaters”, ie they forward the radio signal to the main unit from devices further away. This increases the range of the system.

Specifications

Temperature range – 40 to + 55 degrees Celsius
Power consumption Nominalt <0,5W, maximum 4 W.
230V output 230V / 16A
Alarm inputs (digital inputs) 2 st, 3-30 VDC can be set Normally Open or Normally Closed
Internal temperature sensor +/- 2 degrees at 25 grader C och 230V-outputnot activated
Input external temperature sensor OptionalExtern Tempsensor can be connected
Short range radio  2,4 GHz. Output power1 mW, range ca 30 meters in free field
Weight 180 gram
Size (without plug)  135*73*35 mm
Approvals Fulfills all EU requirements and is CE marked.

 

Documents

Product Sheet Product sheet Ontech Relay 9015
Quick start Guide Quick Start Guide Ontech Relay 9015

 

 

Ontech IR 9016

Ontech IR 9016 is an accessory that you connect  to Ontech GSM 9040 and allows you to control your air heat pump at a distance. You simply move the air heater pump remote control to your phone, tablet or computer.

Functions
Specifications
Documents
  • Ontech IR 9016 connects to Ontech GSM 9040.
  • Air heat pumps are controlled via Ontech Control or SMS or Android app wherever you are.
  • Set temperature, mode and fan.
  • Fits the major brands of air heat pumps on the market. A detailed list can be found here.
  • The last software is available for download on the product page for Ontech GSM 9040.
  • Updating is easy by connecting the supplied USB cable to a Windows computer.

Specifications

  • Cord 1,5 meter
  • Compatible with most air heater pumps and air conditioners on the Scandinavian market. See list här.
  • Range approx. 7 meters.

Ontech Alarm Box 9012

Ontech Alarm Box 9012 is a wireless accessory for the Ontech GSM 9025 or Ontech GSM 9040 main units. It hast has a built-in magnetic switch, an alarm input and a temperature sensor.

Functions
Specifications
Documents

Functions

  • Works with the main units Ontech GSM 9009/9020/9025/9030/9035/9040.
  • The device communicates with the main unit with a short range radio on the frequency of 2,4 GHz. Up to 7 Ontech Alarm Box can be connected to each main unit.
  • The unit has a built-in magnetic switch and magnet included. Suitable for alarming doors and windows.
  • The device has two alarm inputs (Normally Closed or Normally Open) for which different types of alarm sensors can be connected, such as fire alarms, motion detectors, level guards etc. The unit also has a temperature sensor that reports the current temperature at the status request .
  • The device is powered by a 3V lithium-ion battery that lasts at least two years. When the battery starts to run out, a message about Low Battery will be sent to everyone on the alarm list.
  • Up to 7 devices can be wirelessly connected to each main unit of the Ontech GSM system. The range is approximately 30 meters in free field. This is usually enough for a normal sized villa.

Specifications

Temperature range – 40 to + 55 degrees Celsius
Battery 3 V Litium, will last for more than two years
Magnet switch Built-in magnetic switch. magnet is included.
Alarm inputs 2 inputs, one Normally Open function and one  Normally Closed function
Temperature sensor +/- 1 grader
Short range radio  2,4 GHz. Output power 1 mW, working range ca 30 meters in free field
Weight 34 gram iicluding battery
Mått  75*32*25 mm
Approvals Fulfills all EU requirements and is CE marked.

 

Documents

Product sheet
Product sheet Ontech Alarm Box 9012
Quickstart Guide User manual Ontech Alarm Box 9012

 

Ontech Backup battery keeps the device alive when power fail occur. Fits the models Ontech GSM 9020, 9025, 9030, 9035 and 9040.
The software for the devices supports alarms in case of power failure.

Functions
  • Lithium ion battery 3,7  volt 1000 mAh.
  • Are buult-in in the models 9025, 9035 och 9040.
  • Can also connect to models 9020 and 9030
  • Necessary for the power failure alarm function.
  • Keeps the device alive 10 to 20 hours after power failure.