0 item(s) in cart
Show cart/pay
Open

Demo of Ontech Control

Click here to test the control panel.

Applications

In your house or cottage
In the boat
Remote control air pump heater and air conditioner
Alarm, control and monitor
Industrial use

Products

Ontech Control

Accessories

Ontech Relay 9015
Ontech IR 9016
Ontech alarm box 9012
Ontech PIR 9011
Temp.sensor 2 meter
Backup battery
Start
Troubleshooting & FAQ
How it works
How it works
In your house or cottage
In the boat
Remote control air pump heater and air conditioner
Alarm, control and monitor
Industrial use
Ontech Control
Ontech Relay 9015
Ontech IR 9016
Ontech alarm box 9012
Ontech PIR 9011
Temp.sensor 2 meter
Backup battery
Support
    • External temperature sensor with 2 meter cable.
    • 2.5 mm plug that fits the models Ontech GSM 9035 Ontech GSM 9040 and Ontech Relay 9015.

 


  • When connected to Ontech GSM 9025, remove the plug and connect the cables to the screw terminal. Accuracy +/- 1 degree C.

  • The cable can be extended up to 10 meters.
  • Lithium ion battery 3,7  volt 1000 mAh.
  • Are buult-in in the models 9025, 9035 och 9040.

  • Can also connect to models 9020 and 9030
  • Necessary for the power failure alarm function.

  • Keeps the device alive 10 to 20 hours after power failure.

Specifications

GSM Dual Band 900/1800 MHz, antenna contact type:SMA
SIM card Mini-SIM. Comaptible with all operators with GSM (2G) networks
Temperature range – 40 to + 55 degrees Celsius. The backup battery charges between +5 and +35 degrees C and can power the device between -5 and +40 degrees C.
Power consumtion Nominal <0,5W, maximum 4 W.
Backup battery Built in backup battery 4,2 V Litium Polymer, 1100 mAh
230V outlet socket 230V/16A
Alarm inputs  (digital inputs) 2 inputs 3-30 VDC can be set to Normally Open or Normally Closed
Output for Ontech IR 9016
Output for connecting Ontech IR 9016 IR transmitter
Mini-USB contact For updating the firmware. Cable is included.
Internal temperature sensor +/- 2 degrees at 25 degrees C and 230V output not activated
Input for external temperature sensor Extern Tempsensor can be connected
Short range radio  2,4 GHz. Power output 1 mW
Weight 230 gram
Size (without plug)  135*73*35 mm
Approvals Fullfills all EU requirements and is CE marked

 

Firmware

Download the latest firmware here.

Heating

    • Connect the Ontech GSM 9025’s potential-free relay toa three phase relay in the main powerfuse box and control the heat throughout the entire cabin.
    • Control fixed installed radiators (electric elements and heat fans).
    • Connect up to seven wireless Ontech Relay 9015 extra relays s and control the heat individually in many room via controllable 230V outputs.

 


Other applications

  • The potential-free relay can connect any type of electrical control up to 230V / 10A. This can be pumps, ventilation, motors, etc.
  • A special feature for using the device to open ports by command or simple phone dialing is available. This causes the remote control to open the garage door becomes redundant. It has moved into the mobile phone.
  • The potential-free relay can be set with timer function so it turns on or off after the set time.

Alarms

  • Connect different types of alarms to the two alarm inputs of the Ontech GSM 9025. The alarm inputs can be set to alert when the circuit opens or closes.
  • All alarms with relay outputs can be connected, such as motion detectors (PIR), fire alarms, magnetic switches, level guards, pedal mats, etc.
  • Alarm sensors which gives or breaks voltage 3-30V in case of alarm can also be connected.
  • Connect the Ontech Relay 9015  wireless devices and Ontech Alarmbox 9012 to the alarm transmitter and send the signal wirelessly to the Ontech GSM 9040. There is no need for long cable wiring.
  • The alarm inputs can be set with delay.

Temperature

    • Ontech GSM 9025 reports the current temperature. The Ontech Control control panel automatically updates  so you can see the current temperature at all times.
    • An external temperature sensor with 2 meter cable  can be connected and then the temperature is reported for both the internal temperature sensor and the external.
    • Temperature alarm can be set as alarm when the temperature is below and / or exceeds the alarm limits set by the users.

Operating the device

  • The device is controlled with the Ontech Control web panel. This is by far the easiest and easiest way to control and communicate with Ontech GSM 9040. More information here. SIM card for this is included and the first month free of charge.
      • The device can also be controlled by SMS or with an app that uses SMS. A SIM card is required. All GSM operators work but not clean 3G providers such as the operator Tre, hallon.se or Wifog. With apps for Android and Iphone, the use can be simplified by SMS control.

 


Main power monitoring

  • Ontech GSM 9025 has built-in backup battery that is enough to keep the device alive 10-20 hours. Useful when the device is used as an power fail alarm.
  • The device alerts to all names in the alarm list when a power failure occurs and announces when power is returned.

GPS

  • Optionally, a GPS receiver can be connected to the device. The device reports position, speed and direction.
  • Alarms can be set to be activated when the device is outside a preset distance away from the GPS fence.

More

    • The device is encased in line with the IP65 which is suitable for tough environments and outdoors.
    • The device is powered by 12-24 VDC. Power adapter for 230V included.
    • There is a setting that allows the potential-free relay to turn on or off at alarm.
    • It is possible to measure current 4-20 mA or voltage 0-10 V and get the values reported. You can also set alarms when limit values are exceeded or lowered.
    • The device alerts via email. As an option, SMS can be requested for alarm.

 

Specifications

  • Cord 1,5 meter
  • Compatible with most air heater pumps and air conditioners on the Scandinavian market. See list här.
  • Range approx. 7 meters.

Specifications

Temperature range – 40 to + 55 degrees Celsius
Power consumption Nominalt <0,5W, maximum 4 W.
230V output 230V / 16A
Alarm inputs (digital inputs) 2 st, 3-30 VDC can be set Normally Open or Normally Closed
Internal temperature sensor +/- 2 degrees at 25 grader C och 230V-outputnot activated
Input external temperature sensor OptionalExtern Tempsensor can be connected
Short range radio  2,4 GHz. Output power1 mW, range ca 30 meters in free field
Weight 180 gram
Size (without plug)  135*73*35 mm
Approvals Fulfills all EU requirements and is CE marked.

 

Documents

Product Sheet Product sheet Ontech Relay 9015
Quick start Guide Quick Start Guide Ontech Relay 9015